Wonderfulfloor® Products

Engineered flooring (multi-lay hardwood engineer floor board)

Commonly known as Floating Floors, Engineered floors are generally a pre-finished, timber veneer on a plywood base and laid over an underlay. Most have a veneer of around 3-4mm thick which is re-sandable. Engineered floors can usually be installed as a fixed floor over concrete or plywood as long as the surface is flat and dry.

They are highly engineered and designed to be installed quickly and with minimum disruption to your family and lifestyle.

Engineered flooring is composed of multiple layers of veneered timber glued together in a cross-grained lamination that is designed to counteract the natural tendency of wood to expand and contract when faced with changes in temperature and moisture. Firstly, a layer of moisture barrier is laid on the ground, followed by a layer of underlay then timber. It is most commonly used for apartments or units, where floors are situated on a higher level. Each layer of veneered timber acts as a sound barrier, thus minimizing noise and disturbances.

At Wonderful Floor, our selection of pre-finished engineered floating floors features a unique moisture film barrier (registered trade mark) that will slow down the moisture effect by approximately ten fold.

Like any other timber floor, a gap of approximately 10mm should be allowed between the wall and floor to allow for expansion.

Supreme Oak

Specifications
FSC Certified
Size: 20 (top lay 6mm) x 240/220 x 2200mm (random length) 4 pcs per pack
Finishing: T&G
Light brush
Micro bevel edge
Oil coating
Grade: ABCDE
Available colours: corn, pearl, grey lime, possum, Han Dynasty, forgy, antique, silver, Doyle, coffee


General Information



Project Oak

Specifications
FSC Certified
Size:15 (top layer 4mm) x 189/190 x 1860/190mm (random length) 8 pcs per pack
Finishing: T&G
Light brush
Micro bevel edge
Oil coating
Grade: ABCDE
Available colours: corn, pearl, grey lime, Han Dynasty, forgy, silver, gravel sand, cappuccino

Australian Selection & Exotic

Specifications
FSC Certified
Size:14 (top layer 3mm) x 80--135 x 600-1800mm (random length)
Finishing: T&G
Smooth surface
Micro bevel edge
Water base polyurethane coating
Grade: Select & feature mix
Available colours: Blackbutt (smooth or brushed ), Antique Blackbutt (stain and brushed), Spotted gum, Smoked Spotted gum, Jarrah, Tasmanian oak, Kempas, Merbau